Super Sniffer

Topic created by kcbottom
on Sun, 18 Aug 2024 at 01:49

kcbottom said on Sun, 18 Aug 2024 at 01:49...

Stumbled on the website ( https://www.thesupersniffer.com/) & noticed Twisted Beast is selling them, too. Anyone have any experience using these? Tempted to order a couple but wanted to hear any experiences first.

random dude on the interwebs said on Tue, 20 Aug 2024 at 02:33...

I bought two in each size. They do work, just make sure to rinse them after use as the material used for the ones I bought does get attacked by the liquid. One broke, can't remember if it dropped on the floor or just broke.
In essence, they do what they're supposed to do. Just make sure you order the one that fits the bottles you buy.
Seem to recall I paid less than $45 a pop though.

Just got the XTRM Handheld Intensifier from Mr. S Leather. Not cheap but it's been fun to use.

kcbottom said on Sat, 24 Aug 2024 at 00:56...

Went ahead an ordered one. Got them earlier today and , after some testing ;-) , it works great. Would, and will, buy again.

AltantaBottomBoy said on Mon, 2 Sep 2024 at 15:46...

I have been using the Intensifier. (I think they call it the Original Intensifier) But I didn't pay $45. I paid $24 at megapoppers

Md_Bottom said on Fri, 3 Jan 2025 at 13:23...

I make my own. Works great. If you have tools, it's easy. Here's how. Save a cap from an exhausted bottle. Pop out the little plastic cone from inside. Break off that little post in the middle. Use a dremel tool to grind off any leftover stub. Use a drill or dremel to drill two holes, one near the edge, the other nearer the center.

Buy some glass tubing from Amazon. Cut the tubing to length. The length will depend on the size of the bottle you'll be using, but the end of the tube should be about .5" from the bottom of the bottle. Optional step: use a small butane torch (less than $20 on Amazon) to heat the ends of the cut glass tubing to melt away any sharp edges left by the cutting.

Slide the tube thru the inner hole in the cap.
Secure with glue if required. I use UV curable resin. Transfer some nitrite to the sniffer bottle. Place your nostril over the outer hole and inhale. Air gets drawn in thru the glass tube and picks up the nitrite and you get a nice blast.