Lid / Cap breakage issues

Topic created by Mypoorlids
on Sun, 5 May 2024 at 14:01

Mypoorlids said on Sun, 5 May 2024 at 14:01...

I purchased 3 bottles of Amyl Nitrate recently. They work decent, but I'm a bit worried about some issues that have appeared with the lids.

The inner metal/plastic discs are being ejected when opening the poppers. This happened on one bottle and I replaced it with the lid of another. The same issue is occuring. When opening the poppers, the plastic disc is often sitting on the bottle, preventing inhalation. The metal disc occasionally joins it too.

I still have the discs in each lid, but I'm worried about the effect of potentially losing each. Will losing this plastic/metal part of the lid effect my poppers?

Thanks for any help (and for this forum! ^_^)

wildo73 said on Mon, 13 May 2024 at 20:23...

That has happened to me many times,sometimes I lose the bit of plastic film and I suppose the poppers go off quicker then.I often find that the bottles don't seal very well and if they're in a pocket they can leak a little and you notice it as suddenly you feel a wet feeling on your leg